supermarket swing gate access barrier gate trunstile gate
Introduction:
Dimension |
diameter 168*1050mm |
| Stainless Steel Specification |
Body: SS304 |
| Swing arm length |
600-900mm |
| Power Supply |
AC110V±10V,60Hz / AC220V±10V,50Hz |
| Swing direction |
single |
| Swing arm rotation angle |
180 degree |
| Passing Speed |
40 persons/min (normal open)
30 persons/min (normal close) |
Response Time |
1s |
| Input Interface |
+12V electrical signal or DC impulse signal with width >100ms |
| Communication Interface |
RS485/relay signal |
| Operating Temperature |
-15°C ~ 50°C |
| Related Humility |
<=95% |
| Package |
Paper Carton/Wooden Box |
I. Scope of Application
A turnstile can realize blockage and access control of a public passageway. Its mechanical part includes an emergency control device. At the time of power-off, the arms at both wings will open automatically to offer an access. At the time of electrification, the arms will reset. With a variety of configurations, it is fit for all buildings and can solve all control problems at the entrance and exit.
II. Features
1. SUS304# 1.2mm stainless steel rainproof case NC punching, laser boring, a novel and beautiful design;
2. Unique installation surface, guaranteeing simple and convenient installation of system integrator's arm control equipment;
3. LINIX (the best micro-motor brand in China) brushless DC motor is used and its surface is plated with dichromate;
4. Programmable turnstile control, in one or two directions (set by user);
5. Pedestal is fixed by using expansion bolts.
III. Introduction to the Brushless DC Motor
Motor parameters:
45 ZW N 24-30/60JB
Reduction gearbox number
Output power: 30 stands for 30W
Rated voltage: 12 stands for 12V
Rotor magnetic material code: N stands for Nd-Fe-B
Product Name Code: Z stands for DC, W stands for brushless
1. Technical parameters
1.1 Structure: 304#/2.0mm in thickness, round stainless steel enclosure
1.2 External dimensions:
Main column diameter: 169mm
1.3 Weight: 40kg
1.4 Length of rotating arm: 500mm-900mm (or customized)
1.5 Maximum load of rotating arm: 30kg
1.6 Rotating angle of rotating arm: 180°
1.7 Rotating direction: two directions
1.8 Power supply: AC220 ±10%V/50 ±10%HZ
1.9 Driving motor: brushed DC motor (12V)
1.10 Input interface: dry contact signal or 12V level signal or 12V pulse signal with a pulse width ≥100ms; driving current ≥10mA
1.11 Communication interface: RS485 standard; communication distance ≤1200m
1.12 Passage speed: 40 persons/minute (constantly open); 25-30 persons/minute (constantly closed)
1.13 Arm opening and closing interval: 1-2s
1.14 Time needed to enter the passage state after power on: 3s
1.15 Time for automatic reset in case of trouble: 10s
1.16 Working environment:
Indoor, outdoor
Temperature: -10°C-50°C
RH: ≤90%, no condensation
2. Main functions and features
1) Its trouble self-inspection and warning functions make user's maintenance and use very easy;
2) The equipment's running state may be programmed by the built-in small panel on the master control board;
3) Mechanical structure can prevent operators from being clamped or wounded. As a rotating arm is blocked in the process of reset, the motor will stop working within the specified time. The arm will reset again (until it is reset) after defaulted time delay and the strength is small (≤2Kg);
4) Access locking: rotating arm is locked automatically before an opening signal is received.
5) Rotating arm synchronization (for double arms);
6) Automatic reset: if a person fails to pass within the specified time after the turnstile is opened, the system will cancel authorization of this access automatically;
7) The turnstile may be set as constantly open or constantly closed in order to meet requirements of different sites;
8) Induction or time delay will reset automatically in 5 seconds (settable) after opening; and
9) Rotating arms open automatically in case of power failure while they close up at the time of electrification, satisfying the fire protection requirements.
About us
Highbright Enterprise Limited was founded in year 2004 and located in Jiangsu, China.
Mainly design and manufacture retail equipments. Products include various shopping trolleys, shopping baskets, warehouse trolleys, kids trolley, foldable shopping carts, checkout counters, store fixtures, shop fittings, display shelves etc.
With production capacity of ten containers per week, we have cooperated with big chain supermarkets and retailers in Europe, North America, South America, Australia etc. When dealing in these various products fields, HIGHBRIGHT not only offer existing styles, but also customize special and unique design with our professional technique team.
With us as your partner, you'll be well prepared to cope with any future changes. That's because we've never reacted to trends,but instead we've actively helped to mould them with our numerous developments.
Our Vision: To be the best one-stop-sourcing retail equipments supplier from China.
Our Mission: Let more international chain stores use Chinese retail equipments.
Our Value: We conduct our business with Integrity, Honesty and Fairness.
Our Culture: We Sell! We Care!
Audited Supplier 
){kind=link}